JINSOR UD carbon fiber fabric detail introduction and application


JINSOR set weave UD carbon fiber fabirc .
 Advantages:
 1.Set weave can fixed the carbon fiber and will not disorder the fabric even touched by hands.
2.Continuous working in room temperature with Epoxy resin.
3.Easy handled with 50 cm wide.
4.It can be laminated in any direction to reinforce the composite parts .
5.Epoxy resin is very easy to penetrate into the carbon fiber .

Disadavntage:
 It can not be laminated 2 ~4 fiber layers direction in one time.

JINSOR UD carbon fiber fabric can retrofit the concrete cylinder with Epoxy resin.
 Advantages:
 1.Set weave can fixed the carbon fiber and will not disorder the fabric even touched by hands.
2.Continuous workining in room temperature.
3.Epoxy resin is very easy to penetrate into the carbon fiber
4.Carbon fiber fabric can be pulled directly to laminated.
5.Due to the all carbon go in same direction.The tensile and modulus strength of carbon fiber can be 100% taken advantage easily after laminated with Epoxy resin.
Disadavntage:
 Need to clean and coat the primer on the concrete cylinder first ,then laminate ud carbon fabric with Epoxy

JINSOR JINSOR UD carbon fiber fabric can retrofit the concrete slab of roof with Epoxy resin.
 Advantages:
 1.Set weave can fixed the carbon fiber and will not disorder the fabric even touched by hands.
2.Continuous workining in room temperature.
3.Epoxy resin is very easy to penetrate into the carbon fiber
4.Carbon fiber fabric can be pulled directly to laminated.
5.Due to the all carbon go in same direction.The tensile and modulus strength of carbon fiber can be 100% taken advantage easily after laminated with Epoxy resin.
Disadavntage:
 Need to clean and coat the primer on the concrete cylinder first ,then laminate ud carbon fabric with Epoxy

JINSOR UD carbon fiber fabirc for car parts.
 Advantages:
 1.Continuous working in room temperature with Epoxy resin.
2.Easy handled with 50~100 cm wide.
3.The tensile and modulus strength can be 100% taken because of unidirection carbon fiber
4.It can be laminated in any direction to reinforce the composite parts .
5.Epoxy resin is very easy to penetrate into the carbon fiber .

Disadavntage:
 It can not be laminated 2 ~4 fiber layers direction in one time.

JINSOR UD carbon fiber fabirc for boat parts .
 Advantages:
 1.Continuous working in room temperature with Epoxy resin.
2.Easy handled with 50~100 cm wide.
3.The tensile and modulus strength can be 100% taken because of unidirection carbon fiber
4.It can be laminated in any direction to reinforce the composite parts .
5.Epoxy resin is very easy to penetrate into the carbon fiber .

Disadavntage:
 It can not be laminated 2 ~4 fiber layers direction in one time.

We hope to be your key partner to support you and let you be the most competitive winner in the market.

Jinsor-Tech Industrial Corporation.
Tel : 886-4-22383468
 FAX : 886-4-22385238
Whatsapp,Wechat,Line a/c :+886935545453
Skype a/c :oliverchou123
E-MAIL: oliver.jinsor@msa.hinet.net and oliverchou123@gmail.com
Webite: www.jinsor.com.tw www.jinsor.com www.jinsor.en.alibaba.com
ADD:No.60,Section 1,Chong-Sing Road,40650,Taichung City,Taiwan

Go To Top